We proudly introduce you our all new designed Electric controlled low speed winch!
Winch is an equipment whose work is finished by motor power to drive the drum roll and the steel wire wind the drum roll. It can lift the material by vertical, horizontal or leaning directions.
Our winch have already applied in more than 90 countries, and they are mainly used for small installation, tower construction, tower crane, bridge construction, port, and other bridge and road works and mine industries!
Our electric controlled winch can be classified into 7 kinds as listed below! and we can manufacture the winch according to your requirements and actual demands! Detailed parameter is listed below in the technique parameter section!
Slow Speed Electric Winch 100-650kn 0-10.5m/min
Our anchor winches has been applied in China Railway Group, Three Gorges hydropower station, CNOOC, Dalian shipyard, Bird's nest the National sports stadium , etc in China; and in UAE, USA, Brazil, Australia, South Africa, Sri Lanka, Oman and many other countries abroad!
Features
Final Drives gears are made with heat-treated carbon steel offering greater strength.
Precision needle bearing used in high-load areas offering lower friction level and longer life.
High impact case providing weather resistance and protection for internal components.
Durable hook safety snap keeping the loads attached.
Components
How to choose a electric winch?
2.Determine the rope capacity suitable for your working situation.
4.Tell us the basic information you got, and we will make out a suitable solution and offer you careful, prompt reply.
If you want to buy one electric winch,Please kindly tell us the following information for your electric hoist inquiry:
1. The lifting capacity.
2. The lifting height.(How long do the wire rope you need?)
3. The speed?(fast or slow)
4. The industrial voltage.
So that we can give you a exact quotation about your needed products.
KY brand winch | WINCH TECHNIQUE PARAMETER | |||||||||||
Rated load (KN) | Rated speed (m/min) | Rope capacity (m) | Rope Diameter (mm) | Motor type | Motor power (KN) | Overall dimension (mm) | Weight(Kg) | Type | ||||
JM MODEL LOW SPEED ELECTRONIC CONTROL WINCH | JM1 | 10 | 15 | 100 | 9.3 | Y112M-6 | 3 | 620*710*417 | 270 | / | ||
JM1.6 | 16 | 16 | 150 | 12.5 | Y132M2-6 | 5.5 | 945*996*570 | 500 | / | |||
JM2 | 20 | 16 | 150 | 13 | Y160M-6 | 7.5 | 945*996*570 | 550 | / | |||
JM3.2 | 32 | 9.5 | 150 | 15.5 | YZR160M2-6 | 7.5 | 1430*1160*910 | 1100 | open type | |||
JM3.2B | 32 | 12 | 195 | 15.5 | YZR160M2-6 | 7.5 | 1082*1014*610 | 536 | four-axis | |||
JM5 | 50 | 10 | 270 | 21.5 | YZR160L-6 | 11 | 1235*1230*805 | 1560 | four-axis | |||
JM5B | 50 | 9.5 | 200 | 21.5 | YZR160L-6 | 11 | 1620*1260*945 | 1800 | open type | |||
JM5C | 50 | 9.5 | 250 | 21.5 | YZR160L-6 | 11 | 1235*1230*805 | 1800 | four-axis | |||
JM5D | 50 | 15 | 250 | 21.5 | YZR180L-6 | 15 | 1235*1230*805 | 1850 | four-axis | |||
JM5E | 50 | 20 | 250 | 21.5 | YZR200L-6 | 22 | 1235*1230*805 | 2000 | four-axis | |||
JM6 | 60 | 9.5 | 270 | 24 | YZR180L-6 | 15 | 1235*1509*805 | 1800 | four-axis | |||
JM8 | 80 | 8 | 250 | 26 | YZR180L-6 | 15 | 2090*1475*956 | 2900 | open type | |||
JM8B | 80 | 9.5 | 350 | 26 | YZR180L-6 | 15 | 1075*1598*985 | 2650 | four-axis | |||
JM10 | 100 | 8 | 170 | 30 | YZR200L-6 | 22 | 2090*1475*956 | 3000 | / | |||
JM10B | 100 | 9.5 | 250 | 30 | YZR200L-6 | 22 | 1705*1598*985 | 3500 | / | |||
JM12.5 | 125 | 8 | 300 | 34 | YZR225M-6 | 30 | 2880*2200*1550 | 5000 | / | |||
JM13.5 | 135 | 0-5 | 290 | 28 | YZP225S-8 | 22 | 2990*2363*1650 | 6500 | / | |||
JM16 | 160 | 10 | 500 | 37 | YZR250M2-8 | 37 | 3750*2400*1850 | 8800 | / | |||
JM20 | 200 | 10 | 600 | 43 | YZR280S-8 | 45 | 3950*2560*1950 | 9900 | / | |||
JM25 | 250 | 9 | 700 | 48 | YZR280M-8 | 55 | 4350*2800*2030 | 13500 | / | |||
JM32 | 320 | 9 | 700 | 56 | YZR315S-8 | 75 | 4500*2850*2100 | 14800 | / | |||
JM50 | 500 | 9 | 800 | 65 | YZR315M-8 | 90 | 4930*3050*2250 | 19500 | / | |||
JM65 | 650 | 10.5 | 3600 | 64 | LA8315-8AB | 160 | 5900*4680*3200 | 46000 | / | |||
JK MODEL FAST SPEED ELECTRONIC CONTROL WINCH | JK0.5 | 5 | 22 | 190 | 7.7 | Y100L-4 | 3 | 620*701*417 | 200 | / | ||
JK1 | 10 | 22 | 100 | 9.3 | Y112M-4 | 4 | 620*701*417 | 300 | / | |||
JK1.6 | 16 | 24 | 150 | 12.5 | Y132S-4 | 5.5 | 945*996*570 | 500 | / | |||
JK2 | 20 | 24 | 150 | 13 | Y132M-4 | 7.5 | 945*996*570 | 550 | / | |||
KK3.2 | 32 | 25 | 290 | 15.5 | YZR180L-6 | 15 | 1325*1335*840 | 1011 | / | |||
JK3.2B | 32 | 30 | 250 | 15.5 | YZR200L-6 | 22 | 1900*1738*985 | 1500 | / | |||
JK5 | 50 | 30 | 300 | 21.5 | YZR225M-6 | 30 | 1900*1620*985 | 2050 | / | |||
JK5B | 50 | 25 | 210 | 21.5 | YZR225M-8 | 22 | 2250*2500*1300 | 2264 | / | |||
JK8 | 80 | 25 | 160 | 26 | YZR280S-8 | 45 | 1533*1985*1045 | 3000 | / | |||
JK10 | 100 | 30 | 300 | 30 | YZR315S-8 | 55 | 2250*2500*1300 | 5100 | / | |||
JMM MODEL FRICTION WINCH | JMM10 | 100 | 10 | 4800 | 30 | YZR225M-6 | 30 | 1980*2650*850 | 6000 | / | ||
JMM16 | 160 | 11 | 1000 | 34.5 | YZR225M2-6 | 45 | 3350*1920*1320 | 9500 | / | |||
JMM20 | 200 | 11 | 3600 | 39 | YZR280S-8 | 55 | 3500*1960*1320 | 10000 | / | |||
JMM32 | 320 | 10 | 3200 | 52 | YZR280M-6 | 75 | 4330*2350*1760 | 16000 | / | |||
JMM55 | 550 | 5 | 2000 | 60 | YZR280M-6 | 75 | 5000*2800*1900 | 22000 | / |